Pricing

Hurricane Reinstatement Solutions to Showcase HRS New Plumbing Tools at 2022 WWETT Show in Indianapolis

Download as PDF Single Release RSS Feed
Facebook Twitter Reddit LinkedIn Email

Hurricane Reinstatement Solutions (HRS), a plumbing tools manufacturer based in Tucson, AZ, is pleased to announce that they will be showcasing their new tools at the WWETT Show to be held on February 22 to 24, 2022 in Indianapolis, IN. They are inviting those who are interested in plumbing tools to visit them in person at the show to grab the opportunity of 10 percent off from all orders at the event. The plumbing tools offered by HRS have all been designed by plumbers for plumbers.

The WWETT Show or Water & Wastewater Equipment, Treatment & Transport Show is the biggest yearly international trade show for professionals involved in wastewater and environmental service. It offers not just a wide range of networking opportunities but also a wide exposition floor where buyers can see for themselves the latest product innovations and technology in this particular field.

One example of the plumbing tools offered by HRS is the Tornado Reinstatement Cutter. This particular tool is useful for cured-in-place piping (CIPP), which is a technique for repairing and restoring existing pipes by applying a liquid resin and textile liner. A trenchless rehabilitation method is usually applied for this kind of project. First, a resin mixture is inserted into the textile liner. This resin mixture has an epoxy base and makes use of a hardener, such as steam. Next, the liner is inverted into the pipe using water pressure or air pressure. The result is that the side of the liner that is covered with resin gets pressed against the inside walls of the damaged pipe. A calibration tube is then inserted for the purpose of holding the liner in place while it is being cured or hardened. Curing can be done by ambient temperature, hot water, or steam. Once the liner is cured, the resin has hardened, providing a smooth and fitted pipe wall.

The Tornado Reinstatement Cutter is one of the tools that can be used with CIPP. This cutter is available in a variety of sizes of 2”, 3”, 4” or 6" and it allows the reinstatement of a service lateral in just 15 to 30 seconds. In addition, it is capable of getting through more reinstatements than other devices.

Another important plumbing tool from HRS is the Typhoon Cleaning Tool. This is a tool that has been designed for use in pipes that are missing the invert. It is capable of traversing the bottom of pipes that are not there. It can be used to clean up scale and open up reinstatements after a hole has been poked through them.

HRS also offers the Tsunami Jetting Tool, which is a jetting tool with sufficient power to eradicate debris from pipe walls and clear any kind of pipe. High pressure jetting is a method of cleaning the insides of pipes, which uses a water jet to dislodge the debris that are stuck to the inside walls of pipes. Hydro jetting is often used to clean clogged sewer lines and slow-moving drains. It makes use of a blast of water at a high pressure of up to 4,000 psi to get rid of stubborn and hard blockages.

Founded in 2019, HRS offers plumbing tools that have been designed for plumbers for use by plumbers. They have utilized several competitor plumbing tools in the last decade and it was their observation that there was a huge gap in the reliability and quality of the available plumbing tools. The team of plumbers at HRS are experts when it comes to trenchless pipe repair and sewer pipes. After noticing the significant lack of quality tools, they decided to create their own plumbing tools that help with lateral pipe cutting reinstatements and in performing pipe scaling jobs more quickly at higher success rates.

Hurricane Reinstatement Solutions will be demonstrating the new HRS 3HP (3300 RPM Twister) at the WETT Show and the team can be found at booth #1653.

Those who are interested in the WETT Show and/or the tools provided by Hurricane Reinstatement Solutions can check out their website or contact them on the phone or through email. They are open from 6:00 am to 5:00 pm, from Monday to Saturday.

Download as PDF Single Release RSS Feed
Facebook Twitter Reddit LinkedIn Email

About Hurricane Reinstatement Solutions :

Hurricane Reinstatement Solutions has designed cutting edge plumbing tools to help plumbers become more efficient during different plumbing jobs.

Contact Hurricane Reinstatement Solutions:

Mike Gesty

6211 E Speedway Blvd
Tucson, AZ 85712

(866) 377-5862

Additional News Releases From Hurricane Reinstatement Solutions:

February 22, 2022Hurricane Reinstatement Solutions to Showcase HRS New Plumbing Tools at 2022 WWETT Show in Indianapolis

February 21, 2020Hurricane Reinstatement Solutions Launches New Plumbing Tool Called The Typhoon

February 18, 2020HRS to Demonstrate Patent Pending Typhoon & Tsunami Tools at the WWETT Show

August 16, 2019Hurricane Reinstatement Solutions Announces Lowered Prices on Tornado Cutters

August 05, 2019Hurricane Reinstatement Solutions Announces New CIPP Lining Tools Distributors